View RSS Feed

Mikes Z car

240Z frame drawing sketchup

Rate this Entry
Updated 30 Mar 2014:

Screenshots:

Rotating view (click to zoom in):

Click image for larger version. 

Name:	240Z rotating frame screen capture.gif 
Views:	300 
Size:	841.8 KB 
ID:	70597

Front frame rails:

Click image for larger version. 

Name:	Front frame rails.jpg 
Views:	580 
Size:	92.2 KB 
ID:	70545

Rear frame rails looking towards front of car:

Click image for larger version. 

Name:	Rear frame rail updated Mar 2014.jpg 
Views:	696 
Size:	131.6 KB 
ID:	70543

Sketchup drawing for download:

240Z frame rails whole car 20 Mar 2014.skp.zip

Sketchup drawing viewer can be downloaded here:

Download | SketchUp

Revision history:
2013 Dec- Updated drawing includes holes I noticed in the frame behind the seats. (Holes are now in correct location if you happened to have viewed this drawing the first couple of weeks in November)

Click image for larger version. 

Name:	240z frame rails whole car newly discovered holes.jpg 
Views:	283 
Size:	75.4 KB 
ID:	68011

There are a total of four holes added to this drawing from the original, two behind each seat. They are in the same location on the floor on a 1/1970 car and on a 1/1972 car where I have seen them. The two holes behind the drivers side seat are in line with each other vertically so that with the plugs out you can look straight down from inside the car and see the street. Same situation for passenger side, trying for clarity here. The holes are 20 mm in diameter. The holes are in the middle of the frame rail that heads back and up towards the floor beside the shock towers.

2014 March 30- Updated drawing to correct the diameter of rear frame holes next to spare tire just forward of the tail lights. Also the rear crossmember in front of the rear bumper is now shown correctly as being open on both ends, before it was shown as closed off.

The attached sketchup drawing is done to scale and includes the front and rear frame for a 240Z. Can be viewed with the free program sketchup, download from Google (Mac or PC, can work with Linux). Can be zoomed in and viewed from any angle. The drawing was made from measurements from my own car and from the chassis dimension drawings to maximize accuracy.
Can be converted to Autocad readable .DXF with Sketchup pro for importing into Autocad. May need an older version of Sketchup pro to make the resulting .DXF work with an earlier version of Autocad.
I found it interesting that the inside frame rail to frame rail measurement on the rear frame rails where the spare tire well is on my car measured about 10 MM further apart than on the chassis dimension drawing. The manufacturer must have made a slight change there unless whoever made the chassis drawings was off a bit in that area. I made my sketchup drawing agree with the dimension on my car.
Drawing does not show narrowed section on both front rails located about 5 inches behind the radiator support. I could not accurately define that narrowing with the tools I have so I left that off for now.

Litecoin QR code for donation:

Click image for larger version. 

Name:	QR Litecoin.png 
Views:	85 
Size:	1.5 KB 
ID:	68759

Updated 08-10-2014 at 11:37 AM by Mikes Z car

Categories
Uncategorized

Comments

  1. Mikes Z car's Avatar
    Hi Stanley,
    The free Sketchup will import pictures by selecting file, then import. The only thing I know for sure that the pro version will do that the free one won't is it will save the drawing into an Autocad compatible .DXF format. I must be honest here, getting those two pictures to line up 90 degrees with each other and be the right size was a bear for me. If you just want to import a picture and draw on it that much is easy (and fun!). What I do is draw a couple of right angle lines that come together where I want a corner of the picture to be such as the lower left then I import the picture and click on the corner where those two lines converge. Move the mouse away from the corner and click when you have the size you want. Google has videos available that teach various aspects and their technique is likely better than mine, I have watched a couple of them.
    How do you use Sketchup?
    Mike
    Updated 02-13-2013 at 06:45 PM by Mikes Z car
  2. Mikes Z car's Avatar
    Thank you for sharing. I think it would be really neat to have a sketchup drawing of the Z carbs. I have a dream of grandeur where the drawing could be animated to show normal operation and faults with solutions. Sigh, my imagination for use of SU is better than my skill level I think. I imagine your floor plan idea will work. We have SU pro at work. I notice from using the pro version that it has a built in access to a 3D warehouse with a search function. We wanted to draw a bathroom remodel for a project and I found an existing bathroom I could use and modified it. I had to "explode" the download before I could edit it and accidentally discovered how grouping can have subgroups that can be further exploded for further editing. Once the whole bathroom was exploded the sink and other fixtures could then be exploded. Get me to talking about drawings and we will be here all day. heh heh.
  3. Mikes Z car's Avatar
    I agree, Sketchup would allow more to make use of a drawing of an SU carb.
    It would be easier to make a Sketchup drawing of an SU carb if one had a spare carb to make measurements off of.
    I experimented with importing higher resolution pictures into SU. I think I read that if the pictures get large in size it impacts performance.