View RSS Feed

Recent Blogs Posts

  1. Gas Tank sealing with POR 15 standard tank seal

    Many thanks to Jeff G 78 and postings by others for help with this. I noticed the instructions on the standard tank seal can called for thoroughly stirring the tank seal which I thought I had done but when I poured the seal in the tank there were a few lumps. If you look closely at the flat surface on the right (tank baffle) in the completed picture below you can see a couple of small lumps likely from lack of stirring. I used a pint and a half which is a half pint more than what POR says you ...

    Updated 11-19-2013 at 12:57 AM by Mikes Z car (Add better before picture of tank bottom)

    Categories
    Uncategorized