Search:

Type: Posts; User: byunique

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thanks guys, ended up buying the Felpro gasket,...

    Thanks guys, ended up buying the Felpro gasket, and used a sanding stone attached to a drill press to match the ports. Yes, from the sparks, there's definitely a metal layer inside. Hope this thing...
  2. Yeah, sounds like a worthwhile trip to the local...

    Yeah, sounds like a worthwhile trip to the local auto parts. Wow, dremel too, yeah that'd do it on a metal gasket I'm sure. Hopefully, will find the paper ones and just end up using a x-acto instead.!
  3. Came across this, ring a bell for anyone? Still...

    Came across this, ring a bell for anyone? Still can't tell if there's a metal liner.

    Federal-Mogul eCatalog Resource Center
  4. Intake / Exhaust Gasket which I can cut to match ports

    I'll need to replace the intake/exhaust gasket and my head is ported. I had bought the one from MSA, but returned it after seeing the metal liner in the gasket. I think it would be too difficult to...
  5. Replies
    122
    Views
    7,693

    Here's another video which is cleaner, and it...

    Here's another video which is cleaner, and it does compare what it sounds like with a center muffler if you are considering that. Sorry, didn't look over what was mentioned about exhaust.

    Rebello...
  6. Replies
    122
    Views
    7,693

    I have the same 3.0 motor. 278HP/260TQ at the...

    I have the same 3.0 motor. 278HP/260TQ at the crank w/ Triple Mikunis and previous mild head work done. See my profile below to hear what it sounds like... Dave makes solid motors!
  7. So, pulled out the old tie rods and compared to...

    So, pulled out the old tie rods and compared to the new ones from Motorsport Auto. The old ones were definitely longer, about 3/8 of a inch and the threads weren't as deep on the driver side. I put...
  8. never heard of that before...cool!

    never heard of that before...cool!
  9. ah, the scoring of the tire is a interesting/easy...

    ah, the scoring of the tire is a interesting/easy method. Easier to measure across the score than the back of the wheel too.

    Nice, thanks
  10. Thats good to know. Do you recall how many...

    Thats good to know. Do you recall how many threads you are showing on your tie rods? Can you visibly see 1/8"? Is there a easy way to measure toe out besides using a measuring tape on the front and...
  11. Installed new Rack and Pinion - toe out problem, everything adjusted down

    I replaced by rack and pinion last weekend. Its a rebuilt unit from carsteering.com. As far as I know it's a genuine OEM original part but just rebuilt. I assume dimensions of the rack are original...
  12. Replies
    15
    Views
    2,351

    answered my own question on how the play is...

    answered my own question on how the play is actually removed, looks like a bushing replacement

    http://www.zhome.com/ZCMnL/tech/StrRack.htm

    Anyone tried to rebuild it yourself? Is it that hard,...
  13. Replies
    15
    Views
    2,351

    Yeah, I have cinched that sucker down. When I...

    Yeah, I have cinched that sucker down. When I first did that, it definitely helped, but being on the original rack I figure there is not much else for me to do..
    Do you know offhand when they do...
  14. Replies
    40
    Views
    6,283

    Engine: Rebello 3.0 Exhaust system components:...

    Engine: Rebello 3.0
    Exhaust system components: MSA 6 into 1, Ceramic Coated, 2.5 " MSA aluminized pipe from header to muffler
    muffler: Borla Stainless 2.5, Dynomax Center Mufller Bullet
    ...
  15. Replies
    15
    Views
    2,351

    I know this is a old post, my rack in my 73 has...

    I know this is a old post, my rack in my 73 has about 1 inch of play when moving the steering wheel... Does the new rack take out that play? ,and what was the handling difference..

    Thanks a lot!
  16. Replies
    4
    Views
    1,056

    I have had several of their headers over the...

    I have had several of their headers over the years. I painted it black and wrapped it one time as well. Forget the paint, it ALWAYS burns off. Also, moisture gets into the wrap and then it eats a...
  17. Replies
    13
    Views
    481

    Cool ride.. Enjoy the handling upgrade...!

    Cool ride.. Enjoy the handling upgrade...!
  18. Replies
    27
    Views
    15,305

    thats interesting... London :)

    thats interesting... London :)
  19. Replies
    16
    Views
    922

    Car looks in great shape...have fun with it! I've...

    Car looks in great shape...have fun with it! I've had mine for almost 20 years!
  20. Replies
    1
    Views
    1,203

    Ok, finally picked up a Sparco Speed 2 off of...

    Ok, finally picked up a Sparco Speed 2 off of Ebay. From my research, I am looking for a base Sparco part number 500210, and slider... Anything else I need? for my 240? How does it fit together?...
  21. Replies
    8
    Views
    839

    I could be your man. I live in SF, and SSF is not...

    I could be your man. I live in SF, and SSF is not too far away...maybe 20 minutes.
    Email me, me at brandonyu.com. IM/Yahoo/byuniqueman
  22. Replies
    38
    Views
    6,126

    I have a 73, with the mounts built in. Just FYI,...

    I have a 73, with the mounts built in. Just FYI, after having the Motorsport Sway bar in, I had a welder reinforce the weld, because the original weld (after all those years) couldn't take the stress...
  23. Replies
    10
    Views
    463

    Welcome, lots of great Z gear heads here to help...

    Welcome, lots of great Z gear heads here to help out.
  24. Replies
    5
    Views
    707

    mmm, thanks for the replies guys. That helps a...

    mmm, thanks for the replies guys. That helps a lot with what to expect!
  25. Replies
    8
    Views
    2,442

    Office Tomitaku S30Z

    noise porn!
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4