Reply With QuoteI think this is what you need. It's a 1.5 thread and the bolt is 21.77 mm in diameter. Thats 57/64". Threaded portion is 1.15" long.
Rear control arm bolt size
I was browsing under my car and noticed one of the rear control arm bolts was missing, looked on google and here trying to find the dimenstions of the bolt but couldent find it.
does any one know the specs?
I think this is what you need. It's a 1.5 thread and the bolt is 21.77 mm in diameter. Thats 57/64". Threaded portion is 1.15" long.
72 240-- stock motor and drivetrain, 50,500 orig. miles
Forgot the pics
72 240-- stock motor and drivetrain, 50,500 orig. miles
Black Dragon sells them......or used to.
http://www.flickr.com/photos/1404980...7600346077563/
______________________________________________
http://www.flickr.com/photos/1404980...7603350695459/
70, 71, 2 72's, and a 73 240z....
90 300zx and a 1996 Acura NSX.....but who's counting?
If you are referring to the smaller hardware on the hanging plates and U clamps or the differential/control arm cross member that hold the control arms:
Take another out then go to hardware store (in another car) or order from nissan
Apart from the big beastie in the photo above, I think most are M8 and M10... not sure of thread... usually 1.25 but could be 1.5 so buy both threads if at a hardware store.
Last edited by Blue; 11-06-2011 at 03:53 PM.
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply.
The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)
ZCars in Eastern Canada seaport ready for shipment to Europe
http://ZSportCanada.com
Thanks guys, thats what i was looking for
the bolt wasent listed in black dragon catalog.
The other bolts that Blue mentioned are M10 fine thread (1.25mm)
I ended up buying a whole box of them when I was working on my car because the original bolts were so rusted in place that they all snapped off when I tried to remove them.
'71 240Z, Because any fool can drive fast in a straight line.
I think I have a few of the Large LCA bolts if you need some.
Hit me up,
Dave
Rate my Z at Car Domain.com
My 70' 240Z, Daily Driver
My Parking Light and Headlight Upgrade Harness's at MotorSport Auto
HLH - PLH - SCP - ZXP's at MSA *They accept PayPal!!*
Headlight Upgrade Harness info here at ClassicZCar Club
HLH info at CZCC Do a search for info on the other upgrades I offer.
You could also check the link below. I've changed all the suspension bolts on my Z, so the dimensions are known to be accurate (except for strut nuts)
http://forums.hybridz.org/index.php/...olts-inventory
Last edited by Lazeum; 11-09-2011 at 02:56 PM.
Sorry to bring up an old thread, but I have lost one of these large bolts. I cannot find them online or in any local hardware stores. The size is M22 x 1.50 x 30. Does anyone have one, or know where I can get one? I need the big washer and the toothed ring, too.
Thanks,
Matt
Bug Zs-ondabrain again, he's still kicking and knowing him, he has some still. Send him a PM.
I have a few as well, just not as close! Let me know if you need one.
-----------------------------------------
Jim
73 240Z HLS30 149331
69 510 PL510 77603
www.zKars.com
www.calgaryzclub.ca
Reference materials
www.xenonS30.com
I just found a few of those bolts and I think I have some washers too. Email if you need them.
Chuck
cbuczesk@comcast.net
East Coast Z Nationals held at the Carlisle Import & Kit Nationals - May 16-18, 2014 Carlisle, PA
www.carlisleevents.com/events/import
1969 240Z #390
1971 Fairlady Z
1971 240Z parts car
1972 240Z ITS race car
1972 240Z turbo
1974 260Z turbo
1975 280Z my first car
1978 620 King Cab
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks