What to do with a rolling shell

[IdahoKidd]

Hey guys, I suspect this should be on classifieds but that place and I don't get along, plus, I have to be rid of this in a few days and who knows if anyone with interest would see it by then.

I have a 71 240 rolling shell, serial 21xxx, with title that is mostly a rolling shell. From the center of the car back it is very sound. From there forward, it is largely metal cheese cloth. I am going to take it to the scrap yard this week, but on the outside chance someone needs the rear of the car, I could save it. Getting it to you of course is the big issue. I hate to see it crushed, someone out there is in dire need of a quarter panel or the rear panel or ??

Any thoughts from anyone on what to do with it? It is by and large stripped, no gas tank, lights, etc. There is a vertical grid deck in good shape, the rear end and struts are still there, the brake parts are gone.

This is it's dying last gasp........

[Mikes Z car]

I think I am 9 hours' drive from you being down here in Boise. No way for me to scrounge parts off of it with that distance. Thanks for listing the car.

[andres14oj]

mo way this is going to waste, is it guys? hows the rust?

[thriller]

Argh you guys must have such high availability of cars to scrap this! That'd be saved for absolute certainty in Aus

Full 1/4 panels down to the dogleg, 1/4 window glass, maybe rear apron... Door skins... What would you want for them? Pain to find that stuff here...

Full of bog or pretty decent?

[Blue]

That is a great body in this area... so sad.

~ $1,500 to have it transported here (N.S. Canada) sadly.

Someone on the East coast of USA should grab it.

[pakmule87]

Id say do your best to cut out repair panels to sell. I had a guy cut off a weld on kit on a parts car I got, and he said that every single Z he went to look at up north had the spare tire wheel well were rusted out, which is about the only thing I have left to do before scrapping the shell. It would take time, but would be able to get you a little more out of it cash wise, even if you have to sit on the parts for a little while. Just get it down to just bare body, especially if you have a way to get it hauled off, since any part in good enough shape (even some minor pitting) on axle parts should be able to get you a few dollars.

[jeanp]

There is a guy in montreal looking for somethng to start with i saw that on Hybrid Z

in the forum where you present yourself

Bonjour from Montréal, Québec! - New Members Forum - HybridZ

maybe he will be interested.

[Bonzi Lon]

I could use a roof skin, but I see that one has a picture window also.

Bonzi Lon

[newtonhubcap]

Hey Idahokidd, by any chance do you have the interior panels (uncracked), what about the shift knob?

Thanks and sorry to see it go to the grave.

Newtonhubcap

[kjohnson2444]

Ohio winters must be way harder on cars than those in Idaho. No road salt there? Anyway, I've seen worse shells get restored. Are the quarter panels and rockers rust free?