Search:

Having had the Tokico red springs, then the Eibach pro-kit springs MSA sells back to back, I can tell you that the Tokico springs will give you a lower stance than the Eibachs, I'd say anywhere from...

Someone give this man a Nobel peace prize!

Glad you saved the car from such treatment

Sorry I'd stopped making updates here while things were moving along.

I've more or less reached an impasse, or so the guy on the phone would have me believe today.

Keep in mind while reading...

The cardboard glove box can go in from the front. Although it's pretty tricky, I've done it many times without destroying anything.

I wish there was a straightforward procedure to do this, but...

Hey everyone,

Thanks again for the condolences.

The local body shop I took it to has a good reputation and I'd used them for a very minor repair several years ago, but they were not willing to...

Yeah, I am sincerely hoping things work out for the best. If the car is not totaled, I think things may be OK because I am confident my body shop will come through for me.

I admit that most of my...

Thanks, I'm hoping the guys at the body shop make it all right. They have done great work for me in the past, and did all of the dealing with the insurance companies once I handed my car over to them...

Thanks for the tip, I actually just called my insurance company to ask about that. I just now arranged for my preferred body shop to pick it up from the tow company. They'll perform an estimate and...

Thanks guys.

As I'm sure you can all imagine, I'm pretty broken up over this. I've had her for 8 years this month, and I always treated her like a friend, always putting her welfare over my own...

My girlfriend and I were headed down Lake Creek Pkwy in North Austin in light traffic on our way to dinner. There had been on and off again drizzle all day, so the roads were wet and pretty slick. It...

In an effort to close the gap at the top, I pounded the lip outward with some light taps with my mini-sledge hammer. I think it helped by 1-1.5mm or so at most.

The trim piece just seemed like it...

It sounds like what you are referring to is the body seam where the roof is connected. From the factory it was sealed with lead before painting. Normal body flex and vibration can cause the small...

Nice car, and welcome to the forum!

Did the passenger door yesterday, went on pretty easily. Ended up adjusting the door striker all the way inward, bringing the door flush with the body finally. I'm still not sure if I got a good seal...

Stoked as I am to see new retro wheel options, I must agree.

Did not know this was common -- glad I'm not the only one!

You should just link him to this thread! Plenty of discussion here to justify them changing their bulb source...

Both.

The parking light relay harness is made by a member here, Zs-ondabrain, and it's a great product. There are numerous threads on this forum about it, try searching some terms like "parking...

First person I'd talk to is the asshat who sold you a bogus spring kit.

I suppose failing in that, you could contact Tokico directly.

Sounds good, guess I'll dive right in. The OEM-style gasket on there keeps the rain out, but I'm not sure it keeps the exhaust fumes out, hopefully this works out a little better

Took a while, but my pair of Kia seals finally showed up over the holidays.

The Nissan OEM gasket on the drivers side is fine currently, but the passenger side needs to be replaced. My rear hatch...

Mine went in fine with no gap, this was after heating them up in boiling water. They become much more compliant when warm, and don't feel too hot to the touch despite being near 200F by then. The...

If they're labeled correctly, then yes, you have three front springs and one rear spring.

The stance of your car should be pretty "off" from that, I would expect...

I too cringed as soon as I saw the "F" word emblazoned across the screen. Also, it was a shame they sold the 2000GT down the river while trying to fix the Z Goertz myth.

What's with the door seals? It looks like just the textured welting is mounted with nothing else. Did the 210 have the compressible seal material mounted to the door or something instead?