Search:

thanks for the feedback guys - I kinda knew the ebay route was going to be annoying.
@240k style - the other bidder has a low feedback score but at least Ive met him and know he exists.

Hi,
I have my 240k on ebay at the moment( one in toowoomba) --

I have had two, 0 feedback bidders - bidding against each other , I contacted them both and have had NO reply, so ive cancelled...

Hey Conz, as above I really dont know what it is worth so I'll let ebay run its course. If it doesn't sell that way, a local buyer would be useful!
In the log book of the car - it appears the car...

ok - listed on ebay- search toowoomba 240k.

Its such a pity that the PO had taken the boot lid off as the rust in the boot is by far the worst in the car.

Anyways - Ill get around to listing the thing on ebay soon.
I know its rough but...

7263672637
726387263972640726417264272643
72644726457264672647726487264972650

thanks guys for the interest - ive been away but will get pics soon.
The car is very much a project. Its a country car but still has rust as it has been left outside unused for a long time.
...

hi 240k style.

I'll suss out some photos in the next few days-- before the weekend.

I was going to list it on gumtree but it is kinda hard to value as I cant find any coupes for sale to...

hi, i will be listing a 240k coupe in a week or 2 on ebay(or gumtree). Im in Toowoomba queensland also conz ;)

thats how ive always done mine too but I always wondered if i was doing it wrong. thanks guys

Hi all,
just restarting a old post.

What is the surface of the piston, is the outmost face or is it the rebated groove where the "hole" is???

after reading zsaint post i'm more confused-- that is how I thought it worked at the start--low throttle = high advance..

Maybe the datsuns just like it the other way?

Anyways-- Im running it...

Hi all,
sounds like a simple question but ive rung several shops(like repco,autobarn,autopro ect) and there is no listing for my 71 240z airfilter.
There is a listing for '73 and above but Ive...

hey Jim, curious if the electric fan helped with your motor revving,
Ive read that it does(because of the less drag)--what do you think?

to test the vaccum advance, put a small length of vaccum hose on the dizzy advance unit and suck hard on the other end..
it will "give" a little but it shouldnt leak----if you can draw lots of air...

thanks bob for getting me on the right track..
I nearly changed stuff for nothing.

I always thought that the more load a motor has the more chance of pinging-

so a motor needs to be less advanced(at the same rpm) under throttle vs a motor with no/little throttle.

But i may...

Hi all-
I just did the e80-early 80's skyline electronic dizzy conversion on my '71 240z- and I'm amazed at the difference-ie easy to start(dont need hardly any choke now) and seems revver.
The...

i found a few today BUT all have stuffed vaccum advances..
nissan wants $100 for the part..
I did a few phone calls and it seems there isnt a aftermarket replacment..
The $100 isnt the issue-- i...

Ok

Is the 280zx the only model that has the normal conversion "80" module electric dizzy?
I have heard 280c's and same r30's have the same but i wanted to make sure before i went wrecker hunting.

I'm posting this here because it involves aust models.
Is the 280zx the only model that has the normal conversion "80" module electric dizzy?
I have heard 280c's and same r30's have the same but i...

luke,
thank you so so much...you just saved me $ !

Would a 3mm overbore help with the head work?..
ie -its more room for bigger valves without notching the block-
and more room for chamber reshaping, valve deshrouding etc
plus the bigger overbore...

Thats a good web site..
Nice looking gear but a bit too pricey.
$660 is in US dollars right? So prob about $800-900 AUst dollars with freight- Im not sure if they come with rings.
Are the big...

Ive done a bit of a search and a few have touched on this but id like more ideas.
I understand that with a LD28 cranl/l24 rods, there are pistons the can be made to fit- with fly cutting etc.
But...