Search:

It's really not worth the Hassle with regular basket weaves. If they were alpina wheels or something maybe. By the time you convert or buy spacers you will be more into the wheels than just a nice...

Not trying to thread bash. But they're currently selling euro style taillights on ebay from Japan for 299.

A lot of non nissan datsun guys know the value of these parts. Unlike the Chevy and fords which u can still catalog parts. They know and try to sell datsun parts for a small fortune because most...

Did u bondo over some rust? Don't be afraid to say yes because I have some pin holes on my door that bubbled through. Was wondering if I could por from the back and front then paint over it. The rust...

Just because it sold for that much doesn't mean the buyer will reject the sale once the vehicle arrives

It's nice but needs 10s of thousands to make it right.

When will mine ship out? My ebay name is pharaohdeez. Sorry I'm anxious!

In for a pair. What a bargain considering what they sell on the z store. Thanks guys!!

Diesel water pump. Is it better than the normal petrol pump.

Put a meter on the battery and try to start. I bet she drops below 10v. Get a new battery

U get what u pay for usually.

Sorry I. Keep posting. But there is also a fuseable think close to the fuse panel. In that area.

Also there is a plug at the firewalls make sure the pins are in good shape.

Key must be in the on position.

Check ur connection at the amp meter. Power goes through that.

Ohc engine*

Download a book called "how to modify your Nissan/Datsun oho engine" it is a must for frankenstien engines concoctions.

At this point the hazard switch has nothing to do with a no crank or accessory power issue.

You need to start systematically troubleshooting your electrical circuits. Start by verifying ur ignition switch works. Use a meter or test light. If that's okay. Power runs through ur taco. Make...

Changing lash pads is only required when the wipe pattern is not centered om the pad. Stock spec pads are .160 of an inch i believe.

I would just get the stock cam reground. The ppl doing the...

If u need a step by step to test the output voltage before the regulator I can provide that too.

Test the output voltage at the alternator before the regulator. That should tell you what needs to be repalced

Nice car. Dehumidifier? Your better off making sure everything is undercoated and drill hole to fill inside of ur frame and crevasse with some sort of lubricant or waxy substance. Also there is no...

Also make sure u use appropriate strength bolt and lock washer.

When I drill do it slow. When u tap, use oil on the tap. Slowly twist tap into hole about one turn. Reverse half a turn. Then twist into the hole a turn. Then reverse half a turn. This technique...