Search:

Type: Posts; User: Bruce Palmer

Page 2 of 4 1 2 3 4

Search: Search took 0.01 seconds; generated 81791 minute(s) ago.

  1. Replies
    12
    Views
    657

    So you know the "choke on" position will make it...

    So you know the "choke on" position will make it run. What you need to do next is to reach under the carbs and make sure the nozzles are popping back up when you take the choke off. Running the car...
  2. Replies
    17
    Views
    744

    But a flat top heat shield can be used with the...

    But a flat top heat shield can be used with the making of two "S" hooks, drilling 2 holes in the heat shield for the hooks and hooking the springs to the hooks. Just and FYI for those of you out...
  3. Replies
    17
    Views
    744

    If you are mounting 4 screws on a 4 screw...

    If you are mounting 4 screws on a 4 screw manifold then the mounting flange won't have the drop down section between the bottom 2 mounting holes. E46 or 48 or something should be the number on the...
  4. Replies
    17
    Views
    744

    Those from Canada won't fit. They came off of...

    Those from Canada won't fit. They came off of something called a 240zed....... Now that's funny I don't care who ya are.
  5. Replies
    8
    Views
    799

    What would you like to get out of them? I just...

    What would you like to get out of them? I just bought two but Steve may want a couple for inventory.
  6. Replies
    8
    Views
    799

    Thanks. Don't ever think to look there for some...

    Thanks. Don't ever think to look there for some reason...... Old dog new tricks I guess.....
  7. Replies
    8
    Views
    799

    The stock air filter elements.....

    The stock air filter elements.....
  8. Replies
    8
    Views
    799

    Hitachi filter elements

    I'm needing to replace my dirty filter element in honor of the arrival of spring. The last one I bought was thru NISSAN and it was the last one their warehouse had. The parts house doesn't show it...
  9. What's the status of Awesome Z?

    What's the status of Awesome Z?
  10. Don't overlook that braking system. Purge all the...

    Don't overlook that braking system. Purge all the old fluid and replace and see what you have. Old lines and sitting brake fluid drawing moisture can go a long way toward undermining the brakes...
  11. First thing I'd check for is to make sure you...

    First thing I'd check for is to make sure you have a little slack in both choke cables to see if the FAT carb's choke is being pulled "On" slightly when the choke is off. That assumes that both carbs...
  12. Replies
    13
    Views
    1,171

    Don't over look the final filter in the float...

    Don't over look the final filter in the float bowl lid. Could be all plugged with that crud you saw. Also clean the needle and seat and see what that combination of tasks gets you......
  13. Guy, I'd not sensed the quitter in you before....

    Guy, I'd not sensed the quitter in you before. Wud up?
  14. Yeah, you go high and I'll go low and we'll get...

    Yeah, you go high and I'll go low and we'll get him....... Er, we'll go over here and park.........
  15. So how about the link there dummy? B-210 from...

    So how about the link there dummy? B-210 from Hell - YouTube or if that doesn't work try B-210 from hell.
  16. Interesting Race footage from one of ours

    I have had this FHS around since about '96. Finally got it on DVD.
    Back story: Steve Epperly the owner of ZTherapy campaigned his GT4 tube frame B-210 and I shot this at the Rose Cups in I think...
  17. Replies
    7
    Views
    916

    Cheap? I think so..... Someone is buying a set of...

    Cheap? I think so..... Someone is buying a set of carbs & struts and the car is thrown in for free.... Too bad it has to go. That's a hellova start you have going on.....
  18. Replies
    8
    Views
    1,492

    I don't understand what the problem is. The mount...

    I don't understand what the problem is. The mount is supposed to move as in a cushion mount. Tighten the nut over the lock washer over the flat washer til the nut bottoms on the shoulder of the bolt....
  19. Replies
    7
    Views
    1,486

    So now that you've secured a new one, what are...

    So now that you've secured a new one, what are you going to do with the old one?
  20. Replies
    7
    Views
    1,486

    All things being equal you can re-cable yours...

    All things being equal you can re-cable yours with bike brake cable for a bicycle built for two. Works stick, literally....
  21. Replies
    3
    Views
    687

    As mentioned, you can have some garbage getting...

    As mentioned, you can have some garbage getting by the final filter holding the needle open, OR maybe the float has gotten tweaked holding it in the down position. The last is unlikely but pulling...
  22. Pull the choke on and see if that solves the...

    Pull the choke on and see if that solves the problem. If it does, then you're more than likely lean which can show up as a spit back through the carbs.....
  23. Replies
    10
    Views
    1,695

    Back when I was doing the marketing for Zero Rust...

    Back when I was doing the marketing for Zero Rust I recall a call from a user who told me that he grabbed his toilet brush to do the inside of his frame rails. Pretty resourceful these car guys......
  24. Fluids dripping off the nozzle is most assuredly...

    Fluids dripping off the nozzle is most assuredly fuel puddling up on top of the nozzle, either from the nozzles being set lower than the fuel level in the float bowl or the float levels being set too...
  25. Replies
    12
    Views
    1,202

    I'm guessing these were our carbs from the get go...

    I'm guessing these were our carbs from the get go so a Tune Up kit will be like throwing new parts at new parts.

    We have had situations like this before where things have been fiddled with (see...
Results 26 to 50 of 96
Page 2 of 4 1 2 3 4