Search:

Thanks for the tip. I am all good on tools/skill for this one... I see my next project!

So was the fuel rail already drilled for barbs? Or did you have to drill & barb for correct placement on the Z? Pics are good, please post some... As I read about deleting the original Fuel Rail...

Congratulations on all of your hard work. Finished just in time to have a sweet summer!!!

Not that I am being lazy, but are there any particular pieces of advice on these tasks? In all of the...

Inturdnet Explorer has been nothing but a POS, especially after all of the complications with security and Java. I advise installing Firefox, Chrome or even Safari - just don't uninstall IE it is...

Oh HELL yeah! I am thinking that this would be perfect for Marine or or small carbs. Thanks for sharing....

Really, any Black oil based paint would be fine, but there is no fun in that - especially if you have POR around...

I had mine powder coated with the rest of my suspension..

I would recommend...

Just replaced mine, see post with part numbers below:

http://www.classiczcars.com/forums/fuel-injection-s30/51835-hot-start-issue-efi-who-has-who-doesnt.html#post454170

I bought a set of those replacements years ago and grafted them into my harness. They work well, just make sure to get the boots as well. Now If I were to do this all over again I would choose the...

Ok, I cannot make out the color of the darker wire in your pic. So assuming that the wire is blue (with yellow stripe), then the yellow wire will go on the RIGHT. If the wire is black with a green...

Ha! I see now....I will look at mine and get back with you.

The Dude Abides...:-)

Rossiz, can you post some pics and location of the relay and offending plug. From what you are describing, I may have a touch of this too. I think that this whole thread is very valuable because it...

Mike, While JB Weld is a intriguing thought, I suggest welding/brazing to do it right. In my own restoration, I had the holes brazed and then lugs placed in for my mirror to bolt to. Bondo will...

The shield is there to block splatter from the Cam, you would be OK using Permatex® Ultra Black.

Dude - We need more information... What year is your Z? You can download the wiring diagram for many Z's from here:
Z Tech Tips Electrical (AtlanticZ.ca)

There is plenty of horsepower here to...

Hello, It looks like the injectors in your pic are the OEM. The aluminum ring is actually clamps the injector into the manifold. BUT the aluminum transfers the heat more effectively to the metal...

Thanks! Thats the ticket! PM Sent.

After lurking on this Thread and suffering from these symptoms (Stock 78 setup), I am changing out the Injector Insulators to the plastic style and adding the ZX injector fan. I feel that with all...

I concur with Rob. That is what I did when I replaced mine.

Is Welding / Brazing an option???

Sure is purdy!

Yes, I have the stethoscope but I was too lazy to walk into the garage. Besides I enjoy getting grease in my ear from the screwdriver handle!

Looking for a similar problem myself... I did the old 'Screwdriver To The Ear Test' on each injector. Discovered my number one injector had failed. I also created a test lamp and confirmed that...

Thanks for posting the link to the timer! This is great! I am planning to install with a ZX Fan.

I too bought a new one when I was restoring my Z, I do remember that I had to adjust the Glovebox door and catch. I also needed to tweak the mounting tabs for the Center Vent Assy. Looking at the...

Yeess sir. Lean and Mean! BTW I will send you a list of my ECU numbers soon.