Search:

Hey all,

Excellent thread. Lots of valuable info within.

I'm about to send my 44's to a local carb shop for stripping and rebuilding and while they are a away, I'd like to start thinking...

Hey Mark,

If I were to do this again, I'd pull a section apart at a time, clean then in a parts washer, wire wheel them then have then re-electroplated. Cost to do the whole car would be well...

Hi all,

It's been a while since I've visited this site and I must say I have waned in my resto project. However, I have been digging around in the garage and with renewed vigor, are now slowly...

Rest well Enrique.

Thought I'd update and close this thread in one go.

Shakes have subsided enough for now, last big enough to notice was some months ago.

City demolition still continues with only about 1/5th...

Short taking time off work to take this head down to somewhere with some scales, does anyone know what a E31 head weighs? Valves, springs and towers installed.

I have two spare ones that I'll...

Good luck with finding what you need to fill the gap Arne. Keep us posted on what that gap filler is.

Thank you for all your help to me and others over the years you've been here.

Cheers
...

Great read, thanks Alan

They look delicious. Good job well done I'd say.

It's true, your truly is in Denver for four days then off to Vegas for a bit then onto San Juan Capistrano for a few more flying out Wednesday week.

Have to say that the Tilted Kilt in Denver is...

Yes, do it!

Nissan made/makes a triple carb fuel rail without a return so you don't need one either. But there is no point removing the stock return steel line if you don't need to. The stock fuel line will...

I agree, that is good news Kats.

To all our fellow S30 mates in Japan, all our thoughts are with you in this terrible time.

We hope that Kats and his family are safe and unhurt.

James

Here is a pic of one the main roads into town. She's a little bit rooted mate.

Also a pic of a building 100m from my work place. Ours isn't so bad.

A 3rd of the buildings in our central...

I've just been into the office to try and get my wallet as I left it in the rush to get out and I have to say that what you see on TV is nothing like how it actually is.

A 22 story hotel is...

The city is a mess. This has claimed many many lives.

All my family that I have contacted are OK. Thank goodness. Amanda and the kids are safe but emotionally shot.

Aftershocks all the time...

I pulled the cover off to see just how much dust can accumulate. Yes...it's a lot.

That's one hell of a good impact. Time to find a new one.

Most of the floor pan plugs are 25mm IIRC. I've used closed rubber grommets from the local rubber hardware store on m,y new pan. Look great and seal well.

Great thread Kats. I've only just found it. Great read.

My fathers cousins son is one of the miners lost in that mine at Pike River. We didn't know them really. Fourth large explosion today.

All mining has risk. That risk is accessed and minimised as...

To me, if a 2 seater ZX is lowered and in gun metal grey, then they look a million dollars.

The 2+2 ZX and in fact any other Z in 2+2 configuration looks wrong.

I also like the idea of a...

That's all good info but maybe use a closed rubber grommet to close the cabin hole instead of steel and self tapers. Looks kinda factory too.

While you are there, whip off the inner door threshold...

We are now at 2210 and counting. They who don't know say we could have these for another year yet. Bloody hell.

We had a 4.8 yesterday. I was an hours drive north and didn't feel a thing. My wife...