Search:

Victor, You get an AAAAAAAAA+++++++++. Thanks for the compliments on the car. Any suggestions on what would work better. Thanks Goose, yes to the crankcase Straight through no other connections. I...

Bean, That works out to 20mm = .78740 or 21mm = .82677
and 7/8 = 22mm .8906, overall .800 = 20mm or 13/16 :classic:

Would it be correct to say that the valance, hood to windshield, for a LHD and RHD are the same or are the holes shifted for the wipers for the RHD. Thanks

All and Royce thanks for the input and sorry if this is a rehash of a previous post. :classic:

Thanks for the info. I can say that this bar doesn't fit up to a mid year 73'. The bar that fits has a kick out on the back side to clear the diff. Do all the early series Z's (260, 280) have this...

Thanks!!

Jim, What is the going rate for the frames?

ThankZ for the replies. :)

Need to know what size hex fits the head bolts on pre 74' and 83 ZX motors. I assume that the 83 ZX has a hex head bolt as well. Thanks in advance ,
:stupid:

Need a rear sway bar for a 73' 240.
Email: timmprice@yahoo.com

240, Try :http://autos.groups.yahoo.com/group/centralcoastzcarclub/
Steve McC(Zvoiture) is working up and down the coast.
and ...

Deer Murder, I second the motion on the Saturday thing. But Sunday is a day of racing. So I quess ya can't have them both!
No, I wont be there either. :squareeye

It is an easy job to replace just the mast, Just remove the nut on the top on the outside and have some one run the button while you pull the old one out and then run the button while you feed the...

It was for the vapor lock problem and I left it on because it looks better on than off. I will get around to cleaning it up so I can take it off for good.

And the after with 71' SU's. Runs great!!

The Before and After on my 73'

Here is the Before with Flat tops.:sleep:

Just change the gasket myself. Found the same residue and that I have had to tighten and retighten and once again retighten the pan bolts. Havent checked it in awhile, but someone suggested to check...

WOW, that is all i can say!!!!!!!!!!!!!!!!!:tapemouth

Might be your fan clutch. Had it happen but it would whine only at a certain RPM and when it was warmed up. Might be worth looking into. As Bruce suggested, I would also be looking for that cat!!

By VIC POLLARD, Californian Sacramento Bureau
e-mail: vpollard@bakersfield.com
Tuesday April 15, 2003, 10:56:17 PM

SACRAMENTO -- With Jay Leno and the rest of California's classic car buffs on...

I have found that the Wells VR's are junk! In my 73' 240 I have gone through 3 in 5 months and the third one didnt work when I bought it. I have a Standard (Standard Motor Products) VR121 in the car...

:classic:

Its like a Timex, takes a licking at 189,000 and still tickin. No rebuild on my 73' yet!! :classic:

WHAT: Central Coast Z Car Club April Meet
WHEN: Saturday, April 13th, 2002; Arrive by 11:00 AM, Lunch at Noon
WHERE: New Danish Inn, 1547 Mission Drive, Solvang CA. THE ONE WITH
THE BIG...

Central Coast Z Car Club Get Together
Sunday, March 10, 2002

11:AM---AJ Spurs in Pismo Beach (Oak Park and Highway101).
Noonish---Whale's Tail Restaurant in Morro Bay for lunch.
After that?...