Search:

:love: Stunning!

Ran into this accidentally while looking for PClamps...


63890

Slow boat from china... but still
Double Wire Hose Clamp

Pretty sure he didn't make any more of these. Its such a quick job, it might be easiest to ship the bar to Kevin, have him press in the bushings and mail it back. Austin Z Clinic LLC - Austin...

Don't think it matters. I put the tool'd flare on the top thinking it would be rougher than the factory produced flare. The thinking was the weight sits on the bottom flare and you want that to be...

I have some photos posted on my LizardSkin application in this thread http://www.classiczcars.com/forums/open-zcar-discussion/42523-lizard-skin-products.html

wow! WTF? Good eye Leon...

I'm looking at the photo and the distortion on the inner bolt hole seems to indicate that the top plate is too weak to accommodate the negative camber introduced with the slots. The cheap solution...

Its a pressurized gas tube strut cartridge, KYB and Tokico are most commonly used. I use two big pipe wrenches; one on the top nut that is keyed like a bicycle crank nut, the other on the shock...

You should have a solid rear end soon. Might want to read up on the RT differential mount modification to smooth it out even more. Those fuel and ventilation lines look like they are on their last...

Pixar in Cars 2 honored Matsuo-san by naming the Japanese team's pit boss "Mach Matsuo" at the "World Grand Prix". Very fitting tribute. Mach is a '70 Fairlady Z. I spotted a bunch of Z's in the...

Today's Austin American Statesman (local paper) includes a nice glossy F1 race week guide. If you are in town, pick up a copy.
...

Just did my '04 Tahoe which had the same issue. It was the pressure regulator which was odd because it held a vacuum and wasn't leaking externally. Must have been the O-Ring on the high pressure...

Baby gets new shoes!

That myPublisher web site is awful. Car should highlighted on classiczcars LOL

I had puffs of smoke on startup and between shifts. What fixed it for me was new valve stem seals. While I did pull the head and did the valve seals at the same time, it is possible to do the seals...

Seriously cool find.

Datsun 240Z going from LA to Boston being blogged. Looks like something to watch.
http://hooniverse.com/2012/07/11/time-to-introduce-the-datsun-drive/

So trogdor1138, check your gas cap negative pressure valve gasket :cheeky:

Negative pressure!!! ROFL


Symptom is full tank of gas will leak out the crease on both side of cap when making right turns.


54731

You have the hood cracked for more airflow/cooling?

Everything I owned fit into my 240 until I was about 22. I wouldn't buy stuff unless it could fit into "the pack" which was an elaborate load-out scheme to move out of a furnished apartment at the...

Guy Miller ranch... where thoroughbred Datsuns go to stud.

Is this why the console changed between 71 and 72? The stick is in a different spot?

The stress of the gas tank work might have caused a crack in the filler neck. Mine lasted 30 years before cracking. Other thing to check is if the gas cap has an rubber gasket in it or the spring...

Good thread on rebuilding the box here... http://www.classiczcars.com/forums/thread23409.html

Mine came out great. Blasting/painting and replacing the padding took a bunch of time though.