I actually use two BlueSea panels. One is a high current 4 fuse panel then 7748l SafetyHub 150 Fuse Block - Blue Sea Systems
This panel gives me the main high current alternator output fuse and...
Type: Posts; User: zKars
I actually use two BlueSea panels. One is a high current 4 fuse panel then 7748l SafetyHub 150 Fuse Block - Blue Sea Systems
This panel gives me the main high current alternator output fuse and...
Great pictures for comparison Jim.
I betting the incorrect MSA connectors are actually just butt splice connectors, where you were supposed to cut your old spade connectors off your old box...
Datsun 240Z/260Z/280Z Steering Gear (Rack & Pinion Type)
Much better pictures and part number listings.
Courtesy is only showning the bearing (#10) as being available anymore.... No big...
The MSA boxes are very good quality. They have no provision for the OEM lids to fit however. The curcuit ID's are printed on the circuit board so the lid is not required to remember what's what.
I...
I'm on side with Darrel. I'll be you don't have proper push rod engagement into the master.
You seem to have done everything else correctly.
Kerrigan, I have a bunch of old fuel pumps. I can scavenge any parts you need. Not sure how many Nikki or other. Let me know and I'll look. Just took a stock 10/70 engine apart that had one.
Just for clarification here for the correct Stagg part numbers (from hybridz thread about this)
New S30 Shock and Spring Option - Page 2 - Vendor's Forum - HybridZ
#552204 fronts for...
Depending on the year, the hazard flasher could be on driver side or on the passenger side. I believe if you have a tin bracket where a few relays are mounted on the passenger side kick panel up...
Whoa boys. We don't even know what year of Z we are dealing with and we are telling him to go check a fuel pump relay. There are no fuel pump relay interactions until at least the first FI cars. And...
The N47 head also has no provision to mount the mechanical fuel pump. Well you can, but it you have to machine out the port on the side of the head. The three bolt/stud holes are there but none of...
Good, now you know for sure you have an M10 threads. How they got that way, well that's another mystery. The shift rod in your picture sure looks like a regular old Datsun shifter. I wonder if...
No stock Nissan S30 or S130 shifter that i know of has anything but 8x1.25 threads. Get a thread gauge and figure out what you have. A picture of this shifter rod would be nice too.
Maybe get a...
Finally got it home today. Thanks to persimmon240 for swamping for me. We were totally spoiled getting it on the trailer...
7362673627
Tomorrow starts the tear down fun!
Read the MSDS at zmax itself
www.zmax.com/documents/msds_105_avblend.pdf
There is a single ingredient listed. Mineral Oil, >99%
Now is "Mineral oil" a generic term, or is there a single...
I would try to beg/borrow/buy a tail pipe AFR gauge and determine if the bog is the result a lean condition or not.
That will give a reason to pursue fuel or spark with better confidence.
Feels...
QUOTE=John Coffey;462763]About 6 years ago I offered a complete undercar fastener kit (yellow zinc-chromate, all new parts) sourced from Wurth. Class 8.8 and 10.9 fasteners as appropriate for the...
The good news here is that it really doesn't matter if your timing is exactly to spec or your idle sf 750 or 785. Tune it so it runs nice for you (starts easy, idles nice, gets the power and...
Oh sure, I just passed through Cashmere last week on the way back from ZCON. Why didn't you tell me you need Trans mount bolts? I could have brought you some nice OEM ones....
Best of all I...
"Bidding starts at $6k"
and the bidding ends at $0.6K.... who says the progression has to be positive?
I beg to differ about idle adjustment. The top center idle adjust is used only during the high-RPM (3K or so) carb balance check after setting idle RPM and balance using the idle screws on the...
I can tell you the bolts are 12mm x 1.25 threads. Length you can get by measuring the distance between the outside of the on-car flanges and adding an 1" or so. Use the strongest (highest grade)...
Congrats to the bidder who won them just now! $75.01 got 'em.
Wow! plainly with that amount of support and cars (and hence people), there should be LOTS of help putting on the 2016 convention, right? (he said from 3000 miles away...)
I swear that blue square thing upper right where the battery should be is a modified tupperware container. Likely storage for water or methonal injection. Well, at least it has a life time garantee!
Stanley, how did you know those were my three favorite Z's at the show? ;)
Kats, it was extremely cool to finally see your car in person and notice all the details you so lovingly...