Search:

They are actually from a '91 Toyota Surf, ( found my ebay bid )

Sorry for the later reply,
Calipers are Toyota S13WB ( 4 runner from memory, each caliper had, 4 x 45mm pistons )
Rotors, were special order DBA425USL & DBA425USR ( they did not have the stud...

Find yourself a MR30 skyline, it has a L24e engine in it,
swap the head if need be (NM47, or the whole engine), and all the fuel injection bits,
I original did this on my 240K, but now I moved onto...

No,

I was not happy with the resin I used to make the lens with,
it deteriorated in the weather.

Nigel

The early one has Mile Per Hour, and Kilometer Per Hour on the same face,
The tachometer are different with how they capture the RPM ( different electronics )

Nigel

I see you do not have the earlier speedo..

My daughter found this one,

1975 Datsun 240K Sedan | Cars, Vans & Utes | Gumtree Australia Tasmania - Hobart Region

make sure you are sitting down, first... :-)

Nigel

I have one with this colour, with a vinyl roof ( sedan )

Nigel

HI,

Will this cause clearance issues with wide rims / tires ?

Nigel

If I was to do it again, I would put the "pickup" inside the fan belt loop

the way I did it, I would have to remove the pickup to replace the fan belt,
I have not had to do it yet, but i would...

Mine was done like this,

EDIS

Nigel

I have one.... it's put away, came with my coupe.

Hi,

you can try ebay
http://www.ebay.com.au/sch/i.html?_trksid=p3902.m570.l1313&_nkw=datsun+240k&_sacat=0&_from=R40

or your local Nissan dealer, they may be able to get you some new part.

Hi,

You will need the 240K late-model struts (1975+ ?)

1994 Toyota 4 Runner Calipers - S13WB type - suits 25m disc - 4 x 45mm pistons ( pads are dba 1149 )

Mitsubishi Verada / Magana disc...

http://noddle.clanteam.com/Front%20Disc%20Upgrade/index.html

Did you look at the wiring diagram ?

http://www.classiczcars.com/forums/thread45728.html

Nigel

My understanding is, the loop coil one should work, and long as the coil has it power going through the 'loop'.
I could have done this on my EDIS setup, but I create my wiring harness to suit...

Hi,
I still have my gear,
I'm not sure how the resin would go with the heat from the light,

You could do this, with out any gear, and since its a small part. it should not be to hard
...

Is it a heater hose clip , it hold 2 hoses from rubbing ?

The coupes have one on the passenger inner guard

From memory it was around $1200 I think.

I actually saw the car parked at Heybridge ( I have a few photos ), then a week or so later it was gone from where it was sitting ( I assumed it was moved...

Nice mark up on what he paid for it, I was to slow to get it when it first came up on gumtree 6 odd months ago,

I wonder what the '... some new gt clone parts have been sourced already and can...

Yes, they are,
But I ordered my wheels 4 weeks ago,
so now I'm waiting....

Me ?
14 inch
http://noddle.clanteam.com/Front%20Disc%20Upgrade/index.html
i'll upload some more pictures today / tomorrow

I went with the Magna rotors (DBA425 )and the Toyota 4 pot calipers myself..