Search:

Type: Posts; User: Wade

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    9
    Views
    599

    No need to cut them beforehand, just run them and...

    No need to cut them beforehand, just run them and get them in position going over the SU's as normal, then once in position maybe give yourself some playing room and mark, cut sheeth, snip wire few...
  2. Replies
    9
    Views
    599

    They are a tad longer then the later consoled...

    They are a tad longer then the later consoled chokes, sorry I dont have exact measurements on hand. Series one center console the choke is attached a few inches farther back thus the increased...
  3. I need to take all 4 back off and measure each...

    I need to take all 4 back off and measure each again. Thing is I knew I had 2 dif offsets, but was under impression Id be ok as long as kept them paired front to back. Been so cold last few days no...
  4. Still plugging away and checking on things,...

    Still plugging away and checking on things, thanks for all the advice. My rims are all mixed up so trying to get it evened out and balanced, I have the slotted mags but a couple of them are slightly...
  5. I have not taken it to get aligned. Was under...

    I have not taken it to get aligned. Was under impression that the rear end was not adjustable and it pulls a straight line, steering is not an issue. Still looking around for a shop, kind of...
  6. Ok, right on, Ill look around for a shop here in...

    Ok, right on, Ill look around for a shop here in Denver to take it too.
  7. Went thru it all today, couldnt find anything out...

    Went thru it all today, couldnt find anything out of the ordinary, back end feels solid to me, wheels rotating fine and brakes all check out fine. I took it for some drives down some open roads and...
  8. Brakes feel good, Ill go thru and double check...

    Brakes feel good, Ill go thru and double check them tho. I dont really notice it greatly when just pushing in the clutch, its mostly at highway speeds and tends to happen more when changing gears at...
  9. Suspension not so stiff when changing gears, could use recommendation

    Looking for ideas of what to check to get this figured out. The Z has been in garage for about the last 5 years, finally got it running and for the most part all is well except I dont like the way...
  10. Replies
    8
    Views
    1,241

    Fuel pressure is steady 3psi. Checked pcv valve...

    Fuel pressure is steady 3psi. Checked pcv valve and all is well there. Think I got the stuck choke deal worked out, had to bend the arm that the nozzle connects too. When I had the domes off I...
  11. Replies
    8
    Views
    1,241

    http://shop.advanceautoparts.com/webapp/wcs/stores...

    http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Electric-Fuel-Pump-Airtex_5773407-P_52_R%7CGRPFUE2AMS_____#fragment-1

    Thats the pump I got on it. I need to run to the store and...
  12. Replies
    8
    Views
    1,241

    Its an electric pump. Ive been fighting this...

    Its an electric pump. Ive been fighting this back carb for a while now. It has new nozzles and needles, all feels well when dropping the piston and the choke action when I have the box off and...
  13. Replies
    8
    Views
    1,241

    Gas getting into oil

    Im fighting my back carb still, thought I had it fixed but I am still having the choke/nozzle getting stuck and not releasing back up. I have to manually reach down and push it up once warmed up. ...
  14. Replies
    25
    Views
    1,403

    Can just tell that first 1 is rusted out bad,...

    Can just tell that first 1 is rusted out bad, just from the few pictures up you can see it all up in the wheel wells, if its up in there that bad then its going to be all over. But for $550 its hard...
  15. Replies
    80
    Views
    6,728

    Nasty crash, glad you are alright. Sounds like...

    Nasty crash, glad you are alright. Sounds like you were put into a situation I do not really think you could of got out of, if I understand the situation correctly a trailer came off a truck and...
  16. Replies
    25
    Views
    2,377

    Wow, makes me wonder what the reserve was at. I...

    Wow, makes me wonder what the reserve was at. I would imagine 16k for that car would be a nice sell, I mean it did have quite a bit of a things wrong with it. Is it just the 797 making it worth...
  17. Replies
    288
    Views
    30,213

    Sticky: Wet sanding the clear coat, all day. This was...

    Wet sanding the clear coat, all day. This was the first car I ever painted, I learned a lesson today, get the gun set properly or orange peel in the clear coat will take absolutely forever to smooth...
  18. Replies
    159
    Views
    13,845

    A Z was my first car I owned, back when I turned...

    A Z was my first car I owned, back when I turned 16. I just always liked them since then, guess you can say I am still into them because it brings back the old memories. I get many questions from...
  19. Replies
    22
    Views
    1,476

    He asked for an opinion, in no way was I trashing...

    He asked for an opinion, in no way was I trashing 280s, just giving my opinion on what I would think the value is and considering many people feel the same way as far as the value in the 280 vs 240. ...
  20. Replies
    22
    Views
    1,476

    Guess you would need to find someone into the...

    Guess you would need to find someone into the 280s, I would imagine many people are like you and feel if they are getting a Z they might as well get a 240, so it basically kills the 280 value for...
  21. Replies
    15
    Views
    1,359

    You mention Advance, I assume you are referring...

    You mention Advance, I assume you are referring to Advance Auto, and if so do not forget about the online discounts they offer. You can take a nice chunk off the price if you order online and pick...
  22. Does anyone have any input as far as the air box...

    Does anyone have any input as far as the air box only having the one breather hole going to the dome. As Bruce mentioned, some people drill out that second hole, curious if there is any benefit or...
  23. Replies
    5
    Views
    1,277

    Ok, I am good now. Haynes book was a little...

    Ok, I am good now. Haynes book was a little confusing, looks like the smaller moon goes to the rear in the picture, but I did as you guys said and everything was fine. Was a little worried about...
  24. Replies
    5
    Views
    1,277

    Yeah its like exactly one terminal over, so the...

    Yeah its like exactly one terminal over, so the notch on the cap is directly below the #4 plug wire. I am changing the oil pump tomorrow, if understand it correctly from posts on here I could just...
  25. Replies
    5
    Views
    1,277

    Distributor may not be installed correctly

    I am at tdc, and this is where my rotor is sitting. My finger is on wire 1. This is a D612-53 distributor.
    51072
    51070

    Am I correct that my distributor shaft is out of alignment? It runs like...
Results 1 to 25 of 65
Page 1 of 3 1 2 3