Yep it blows out fog when started and driven. Plus new radiator is empty. SO up for sale or fix it. May be some stop leak but what Kind works?/
Type: Posts; User: 280TurboZX
Yep it blows out fog when started and driven. Plus new radiator is empty. SO up for sale or fix it. May be some stop leak but what Kind works?/
way too funny.
Replaced the radiator with a New one(three core Brass/Copper) from RockAuto.com ($150.00). Perfect fit and looks great, bonus, no more leaks. Made a defrost duct pipe for drivers side(missing when...
I did think about selling it before it started costing too much money. Craigslist was on my mind. Good thing I am one of those "Don't be afraid" and dive in and tinker. I could of easily spent over...
I tried those first(re-soldered) and still nothing. SO I turned over the unit and found the curcit board on the back(little-r one) down near the bottom half up about 1 inch or so, Is where I found...
I tore the cover off and started the car(holding the ECU) I pressed on the circuit board in different spots and wallaah.The car died and the pump relay started clicking, I pressed again in the same...
I tore the cover off my ECU and started the car(holding the ECU) I pressed on the circuit board in different spots and wallaah.The car died and the pump relay started clicking, I pressed again in...
Hey All, I tore the cover off and started the car(holding the ECU) I pressed on the circuit board in different spots and wallaah.The car died and the pump relay started clicking, I pressed again in...
You maybe right on the money. I tore the cover off and started the car(holding the ECU) I pressed on the circuit board in different spots and wallaah.The car died and the pump relay started clicking,...
My 1982 280ZX Turbo has 229,672 miles on it and purrs like a Lion. I wouldn't say Kitten. Sounds meaner. Never been rebuilt yet.
Thanks so far for some input. I've been ripping connectors apart and cleaning them, Even removed ECU, Took apart and visually checked all solder joints and electronic parts. Scraped(To Bare metal)...
Hi, I have to kick my ECU with my left foot to get it to let my fuel pump cycle up so my car will start. Other wise when I turn the key to ON before cranking,my Fuel pump relay starts clicking and I...
Well I still have an intermitant problem. Seems more likely for the relay to do it's clicking thing more in the morning at first start-up. Once after I give the ECU a bump from my left foot, the...
Yep, I sprayed all connections with Electric Contact cleaner. And it seemed to help until this morning. While it was running, I jiggled on the wires and at one moment saw my tach/engine take a dive....
been fighting a clicking fuel pump relay[no run]When lt doesn't click I can drive. But today I did some tinkering and when my relay started clicking I tapped on the ECM near the driverside foot, and...
I did some tinkering and when my relay started clicking I tapped on the ECM near the driverside foot, and it stopped clicking and would run.So I either have faulty wire connection or maybe my box is...
I did some tinkering and when my relay started clicking I tapped on the ECM near the driverside foot, and it stopped clicking and would run.So I either have faulty wire connection or maybe my box is...
I bought a FSM on Ebay. A (DVD) for $10.00 and it's the best(cheapest purchased) manual I have ever bought and it's the BEST I ever owned. Boy it shows you how to rebuild everthing on the car,Shows...
I think your right. Now that you mentioned it, I see wear marks on either side of the rear window on the hatch itself. and the holes(4) are located across the lower hatch(2-3inches below glass) about...
Hi sorry I dont own a 240,260or 280z Mines a 1982 280ZX Turbo/Automatic. But maybe you have the answer . Any ideas? I turn the key on(before cranking)and I hear clicking under the dash on the...
Any ideas? I turn the key on(before cranking)and I hear clicking under the dash on the passenger side and hear my fuel pump pulsating. After a few dozen give or take clicks it stops and I hear my...
hey Guys I found one($65.00) delivered. No more leaks.Thanks for any help.I also replaced my leaky fuel pump. No More Fumes. Safer ride. Next it's the radiator, boy too bad the PO didn't take better...
Your current engine installed is a Non-Turbo engine,probably from a donor car.The turbo engine's oil filter was mounted at an angle not straight out from the block.The valve cover would also say...
Could Be. I dont know what the original spoiler would look like. There are four threaded holes on the rear deck lid.
Hey guy's and gal's where does a ZX man find driver side door/window trim? No bodys ever on the 280ZX forum, So I ask You? I have a 1982