Search:

I thought the floor in #6333 were in bad shape. To everyone viewing it just goes to show that with a little ingenuity, the right tools, patience(lots of that) these rigs can be better than new...

Thanks Steve I will give it a shot and post my results

Also one other question is it possible to test the ammeter for functionality? I.E. Does it actually work without the car running?

Ammeter is hooked up but I might have to pull the dashboard out again to check it as it is almost impossible to do a thourough check when trying to work under the dash iin these cars. The dashboard...

Thanks guys
All grounds were checked and checked again. Strange though I tested with a test light and only 2 fuses are getting power. The fusible link running from the started to the main harness is...

YES but I will give another check on Saturday

They look GREAT. I will place my order this evening.

I have a set of 47MM and plan to install them maybe sometime after the first of the year. I spoke with Dave Rebello and he seems to be quite knowledgeable about OER's. Also I purchased mine from...

Hello crowd
I know its been a while but I have been trying to get #6333 back on the road again after a main harness fire back in 2005. I was able to scavenge an exact copy of a good unmolested...

Somoeone may have installed a digital clock or some other guage that only lights when the ignition is turned over!

SPORTBM
I can't add much more than the others have. I would be most concerned that if you are able to get it to be a daily driver how reliable will it be? Or should I say "How problematic will it...

Well I have replaced the lines throughout in my AVATAR but it was a rolling shell. If you are not able to get the factory section already formed that will require you to bend them yourself. Not a...

My plan is to intall the ZX map light where the 240Z dome light goes. I always liked the swivel aspect.

SLICK AS HELL! even without sound at work. I could just imagine the sound.

I installed an MSD ignition and they sell the unit that allows the tachometer to continue working just fine. Any perfomance shop that sells the ignition module will usually carry the unit that allows...

I just can't wrap my mind around why someone would thhrow so much money at ruining a good car instead of taking that money and time to make a REALLY GREAT car. I just don't get it.

From the moment I stumbled onto this site and learned of the 240K I have tried to find something appealing about it from every possible viewing angle but for some reason I JUST CAN'T. Maybe it is...

That Baby looks SWEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEET ZED!

Ok fellow enthusiasts, I'm looking for some suggestions or some direct examples of camshaft profiles or camshafts that were used in your stroker builds. This is the planned setup:
47MM OER Triples...

I agree with keeping it. The money you might NOT make in a sale can be used to forge ahead with what you are doing. In it's current shape a potential buyer will just try to wear you down on the...

What a great video and a really cool drive. When i do this trip I will do it in the cool time if the year with one of my sons. My mind gets lost just watching the video. Somewhere to go and plenty of...

If you have that much money lying around why wouldn't you find one worth restoring to a condition that YOU want? All that "MATCHING NUMBERS" crap in the end means nothing anyway other than...

Hey KELLY MISS this is not the place to advertise your cheap leftover flea market crap. Take that BULL**** somewhere else to try and pawn it off.

Hey KELLY MISS this is not the place to advertise your cheap leftover flea market crap. Take that BULL**** somewhere else to try and pawn it off.

If they were only sold in 16X7 diameter and width. Really nice though.