Search:

I have the same issue, never thought of a helicoil
thanks

By the way thanks for the info

I got the whole package a r200 clsd. I paid or it but what the heck those things are very rare, I couldn't pass it up.

I can't understand it either.
I have a r200 diff and bought one of those finned covers. Now my transverse link will not go around it. (The bar that goes behind the diff.)
I was wondering if...

Does anybody make a transverse bar for a 280z that go behind the lower transverse bar??

call Z Therapy they can help anybody

The stamp with a "C" marking is what i use. Its off a 260 but it did have a bit more pep than an "A" cam.
Externally oiled..

Cam Mark A C A
Date all all < 8/81
Part...

have u tried Gromm in San Jose. They did a perfect job on my E31 about 10 nyears ago and it still perfect. Do expect overnight work but what you get back is well wroth the price.

I agree with Mr. Iron that the 240z did not come stock w/a rear sway bar. The forwrd mount sway bar is surely an after market piece. The only problem with those kits is that the mount to the body...

I want one, How Much??

T-Man where did u get ur's moderenized, i'd like to look into that.

ZK - I've seen the speed hut web site but was unaware they had a tach with built in indicators. Did the tach fit in the...

Chuck is right....
I've done the same by myself. Get the engine parts on, Heards, intake even the fan and drop it in.All u have to do is support the back of the motor at the right angle to get the...

Are there any tach upgrades available?? I see some have used Autometer 3990's 5" units. However you lose the turn signals and high beam indicator and the tach is to large to fix the bezel. Any other...

thanks all for the feedback.
Now i gotta get my piece parts cleaned up and coated so i can mount that R200 in my 71.

i am begining the process of replace my R180 w/a R200. I was able to get all the piece parts to start the process however my rear sway bar is aftermarket and it bolts to the plates that come down to...

Here is my 2 cents.
If you just want a header buy a MSA, they are good quality product for the price. If you want to get serious and performance try rebello or arizona Z, which is step up but you...

its the retention spring that goes on the linkage conection to the intake manifold..

Has anybody used Racetep (Top end Performance)??????
They seem to have a lot of nice items but i read some bad things.
Should i be looking to them for help on my rebuild project or am I wasting my...

Cork screw lugana seca a classic. I like it!!!!!!!

I replaced mine w/ a momo and love it. Thou the stock wheel is easier to use the momo does give a better response but is heavier to use. I have to admit the stock wheel is better looking and requires...

that is correct!

i made an offset gear shift after replacing the original 4 speed with one from a 73. I used the straight shift lever from my 70 cut the 73 shift lever at the nuckle, welded a thich strip from the...

I have a 5-Speed close ratio (i beleive) in my 240z.
Q: what is the correct oil to use for it?
the new stuff sold by Nissan is for the more modern trannys (very lite) but can i use it for this...

JMark it seems u've been down this road before. Did u end using a Stahl??

Thanks for all the great comments. Rebello or Stahl.
My 71 has it orignal 2.4L and E31 head. Everything has been gone thru.
Head and carbs done by DL potter and Block by myself.

SInce i have...