Search:

Thanks EuroDat!

I dropped my front crossmember to find I had 2 different engine mounts. Is one wrong or from a different model? Or a no-name engine mount? The one on the left looks correct.

68117

68118

Got one with a chisel and hammer but the other was stubborn. I gave it to a local machine shop to remove. Most likely with heat which I don't have access to.

Beautiful wagon! Love those cars.

I'm redoing my compression rod bushings but the sleeve on the end seems to be seized onto the rod. Does anyone have any suggestions for removing it?

Test fit of some truck wheels that were laying around, lol.

http://www.kiraamzsy.com/photographs/Datsun/photo%20(12).JPG

Right on Sean! Glad to hear you've had time to work on the car. We miss your beautiful car up north :)

Thanks for the replies! I'll look into these options.

I'm trying to replace all many bushings with rubber due to how our roads are up here; however, the parts below are no longer available through Nissan. Am I now forced to use urethane for these or is...

I hadn't seen the steering knuckle o-ring until today when I ripped it off by accident. So good idea on replacing it! lol

Master cylinder is on a future list when I start getting into the engine...

Struts & springs /w poly bump stops are new from last year.

Here is the list so far. I'm thinking of doing the wheel bearings as well but haven't quite decided. Am I missing anything which could...

The saying, "If it ain't broken, don't fix it" has been on my mind lately. You pull apart one thing to fix/replace and see 3 other things that could be replaced as you're already this far in...

I removed and cleaned up the turn signal switch and checked all connections on the combo switch for continuity. I'm unsure why but now the drivers side turn signal is working again. I'll be doing...

Car: '73 240z

Front turn signals work but the rears don't and the hazards work on all 4 corners. I've tested the switch and it appears to be functioning fine. I tested the bulb socket and they're...

http://ponycraft.net/wp-content/forum-image-uploads/dj-v0rt3x/2012/08/Clap.gif

I installed new weatherstripping in the windows for the doors. (there was none in there)
Installed new rear interior panels as a previous owner cut out the speaker grills leaving a large hole....

Booooo, pictures are blocked at work :(

Congratulations on the new car!

On a side note, I love your country. I've been there several times and it's a beautiful place.

Criminal Minds (2005) - Episode: Extreme Agressor

Several scenes with a 240z driving around.

Not sure if this was mentioned through this thread.

Drain the tank using the plug as you'll be able to see if there is any rust sitting at the bottom. You probably wouldn't be able to tell if you siphoned the tank.

It's not too difficult to put...

I love 510 wagons. Such a cool looking car.

That's pretty neat to have an indoor shoot like that. One small critique, why are the pictures blurry? Just an issue with rescaling it?

Subaru Impreza for my winter car.

I got that book today too :) Looking forward to reading it.

A friend of mine took some photos of my car a few weeks back and he did such an amazing job that I wanted to share some of his work.

http://www.tristanfast.ca


...