Search:

I have some NOS rubber bumpers still in (old and faded) baggies. I dont have a 240 though and im not positive these are the rubber parts you are looking for. If you want to get a picture and point...

Any pictures of those on an actual Z? I'm extremely interested

Dynolicious is available on apple devices, and supposedly it single handedly killed the G-Tech performance devices. I haven't used it myself as I have an android, and aDyno does look like a hokey...

Nice! i wonder if thats the one I saw being tested when i was there on Friday. I have the same carbs and cam selection. The displacement says 200 on there, is that a typo? 200 cubic inches is...

I was on vacation when you posted, but i did this exact same thing except I paid three times as much. Below are the part numbers from the Z store. Since I was in the clutch anyway I bought a...

I proactively installed digital flashers in my 260z without any issues, the pair of them cost about 10 bucks at Orielly auto. As I have mentioned before, light is more complicated that people assume...

Its officially arrived! I spent the last 2 weeks traveling Europe so that put a bit of delay on things but i took my first jet lagged day back to go get the engine. Rebello had probably a dozen...

Subscribed, i would like to know as well

reminds me of the chevy tornado. Gasoline and not available in the US. These actually look pretty cool in person

Tornado 2015 | Camioneta Pickup Compacta | Chevrolet México

I called for my weekly update call. Supposedly the motor is finished, I'll go pick it up next weekend. First post was on 3-3-14, today is 9-12-14. Total time: 6 months 2 weeks

also post #100 :D

Just a few months ago i went on a quest to find one of these. I think they might be extinct. Also the cost of lightening and balancing the flywheel was more than buying an aluminum aftermarket...

Seriously, spitz17 said that in the beginning and was dead on. I had about a 2 month delay due to lack of head availability and then some more delay for me to pull everything and send it in. I got...

Link wasnt working, i found it here:
MINICARS: Japan Post celebrates the Mazda MX-5?s 25th anniversary with commemorative stamps | Japanese Nostalgic Car

My early '74 dropped right in. I used some clamps to hold it in place while the silicone dried, and i put a screw on the bottom of each end. i figured the whole dash was messed up already, one more...

Theres always the fidanza aluminium flywheel ;) Thats how I ended up with a spare

And a header!

I have 2 used 225mm flywheels i dont need, one of them came off of my almost daily driver just last month. it appears flat and you can have for shipping +$20. Pm me if your interested

Even here in Kalifornia you can get R134a over the counter. Theres a core charge of I think $10 a can but anyone can purchase it. Also some parts stores will rent you an vacuum pump and some gauges

You cant jack from the oil pan and its been my experience this is true on all cars. I just pulled my motor for other reasons and I estimate you need about 6 inches of lift to get the mount out. To...

With the aftermarket radiator its doubtful that you will get an OEM shroud from a Z to work. You can try different shrouds from other vehicles but that could be an endless journey. you could make a...

My stock 260z overheated just by having a completely disconnected condenser mounted in front of the radiator. more than the internal parts of your motor i would be concerned with air flow over the...

That does sound like a timing issue. Older carb'ed Z's run timing at 17 degrees so try setting it there and see how it takes it, some people run in the low 30's so dont be afraid to set the timing...

Thanks guys. I wasnt aware of the top gear indicator switch.

I have a 5 speed manual transmission that I just pulled and cleaned up a bit. I have read the following articles and i think i have identified it as a wide ratio 5 speed due to the fact that it has...

I considered an engine swap. Among those options were ford 5.0, LS1 and a VQ35. Realistically i was going for 250 to 300hp which a basic junkyard v8 could provide with minor effort. Ultimately i...