Curious, what was the website?
Type: Posts; User: 1975yellowBSPZ
Curious, what was the website?
He must have had support from the se-r forums, and probably started druming up votes earlier then Craig.
I looked into one of those SE-R Spec-V's as a daily driver, fun little car to drive,...
Even the guys on HybridZ didn't think that is the car to be 'gutted' for a v8 swap, THAT should say something.
Bw
I run 235/60 on 7" without much trouble, I think I'd take the additonal contact pacth over the 205, even if I didn't get all of it on the ground.
just my opinion.
BW
The 'mooneyes' site in japan used to have them with the long bases in chrome.
even with the international shipping they are cheaper then the nissan part by a lot. But I didn't seem them when I...
First I don't think I would buy them again.
I got them off ebay, and they are very flimsy.
the body is black plastic.
I will look and see if there is a name on them anywhere however.
Bryan
Home Depot
:classic:
I have a black metal plate that covers mine.
not the most elegent solution, but it works.
you can sort of see it in this picture:
...
doesn't do it for me. Every few years someone makes a new part to make early z's look 'modern'. Every few years later they end up on a car on ebay and we all laugh at them and someone has to pull...
It all depends on the driver, John Coffey in volvo wagon, me in the ferrari, I'd say advantage = John
therefore a volvo wagon must be faster then a ferrari, right?
Bw
ROFL
dogma420,
For reference, $300 AUS is about $200 US, and I don't know what classic datsun or MSA charges for shipping to OZ, but I'd guess it's more then $50.
BW
I also am having my 280 run very rich.
I have checked the archives and think I have some idea but would like some direction.
It smokes slightly when the throttle is depressed and has a...
Hey TexasZ,
If you were in Dallas I have a 5 ton engine hoist and engine stand you could borrow for as long as the job took. Lemme know if you head up here in a pickup.
Bw
The K1's have a good rep in autox. Light and strong. The Miata and Civic SI guys use them a lot.
?!!?
Geography major, I presume?
For those who remember this sorted saga,
blown motor, broken exhaust stud, broken head bolt and...
put a $150 low milage 42 head from zcarparts in Houston (Thanks Kin!) on a $50 motor from some...
Won't you still have to get them mounted if you buy them from these guys? :classic:
I think I have it narrowed down to a selectively sticky throttle cable. (yes cable) It articulates properly except it binds the last few centemeters and sticks open enough to make the crazy high...
I finally have my second motor in my car, go to start it and... it turns over, starts, idles ok for a second and starts reving like it taking off to outerspace. I had to kill it. tried again, same...
That seems high. Is that with or without the neon rims?
Azenis sports in 14" can be had new for $176.00 plus shipping
http://www.vulcantire.com/azenis_t.htm
If you suspect the rear bar is too stiff, pull it off, and replicate the issue. If the symtoms are unchanged or aggrivated it is most likely bushing, struts, or both. If it settles down with out...
It looks good!
Did you ever do something with that boring white car? :-)
I haven't noticed too many of my 350 buddies leaving there motors alone. Nismo exaust, more power blah blah.
we are all dorks with cars who like to tinker. But the 350z guys cars are running...I...
I would agree with all of these statements, except I would say I think that sports cars are where you find them. The srt4 and wrx both are quirky, have character (good or bad), and are quite...