Thanks for the replies. I'll check the Portland people out. Maybe call them and see if they're up to the task. Tucson, where I live, doesn't have much available. Vic.
Type: Posts; User: tanny
Thanks for the replies. I'll check the Portland people out. Maybe call them and see if they're up to the task. Tucson, where I live, doesn't have much available. Vic.
Is there a vendor who can rebuild a 1973 240z Tachometer. Not someone who just substitutes a junkyard unit, but actually can go through the circuit board and the mechanical and repair. I vaguely...
I've often wondered if parking my cars well away from other cars(at the extreme outer limits of a parking lot) might actually invite morons to do damage because it probably makes my cars more...
Addition to my previous message:
ps The tiger sounds must be from putting ESSO gasoline in your tank. "Put a tiger in your tank". That may date me a bit.
Thanks for all the guesses. The sound definitely is not present when the car is stationary. If it were something hanging up on the brakes, you would think it would change tone or even stop when I...
My 1973 Z has developed a high pitched bird like chirping that speeds up and slows down with the vehicle's speed. It sounds like it is coming from the front, passenger side area. The sound is not...
I hooked my triple webers directly from the mechanical fuel pump(which is supplied by the original electric pump on my 73). Originally I installed the pressure regulator between the mechanical pump...
57 and contemplating selling the Z to pay my $450/month individual health insurance premiums. That may keep me alive for another year. Love the US healthcare system:tapemouth
If there is not enough weight on the tongue, you will lose steering control. Really critical to have enough weight on the tongue so that there is never any lift on the rear of the car. My mother...
That's what I tell all the women.:laugh:
Anyone know of a good Z mechanic in Tucson AZ capable of working on SUs to try and pass emissions? Thanks, Victor.
2006 Civic sedan, automatic. Fairly ugly generic car, but I actually get a hair over 40 mpg consistently(no fudging) on freeway driving with the AC on. Didn't really expect that good of mileage. ...
Darrel,
I moved to Tucson a couple months ago due to divorce, health, and both kids are in college now, so I headed for warmer parts. Don't know anyone here but am actually enjoying...
I'll do what I can with the roundtops. Maybe I can find a mechanic here in Tucson who is familiar with getting cars to pass the smog test. At least find someone with an exhaust analyzer and see if...
That was a shocker. He helped me quite a bit with my Z over the years and I am really grateful. Good luck man. Victor.
Speaking of smog...... My 73 240z triple Webers were running rich so I was pretty certain my car would not pass the AZ smog test. Failed miserably. Unfortunately AZ only exempts pre 1966(or 1967?)...
Thanks for the heads up. Victor
I have a 1973 240z that had triple Webers on it, and I am replacing these with stock 3 screw SUs. The rod that goes from the firewall to the carbs is too short and it looks like the rod that I need...
The Z is not a particularly safe car, especially in a side impact crash. It is very low and light, two major factors that decrease crash survivability. The safety of a Z doesn't even come close to...
Thanks for the advice everybody. I was wondering whether the clamp weighed enough to cause any significant balance problem. Don't really want to experiment and have to take the axles apart again. ...
I purchased some rear axle boots and they come with clamps for which I have no tool. What can I use as a clamp: hose clamp? Thanks, Victor.
Thanks for the pic help.
Looks like I didn't install the pics correctly. May need help on this.
When I bought my 1973 240z, the PO said the differential came out of a 510. It is a 3.90. Not sure if he was positive though. Does ayone recognize the mystery diff? It is slightly lighter weight...
Yeah I'll definitely borrow a pin puller if the pin doesn't come out easily. I did buy new pins and bolts. Thanks people. Victor.