Search:

MSA sent a connector that i do not need.



Actualy the connector replace the voltage regulator
witch is bolted on the fender very small part to replace
a big part aray!!!

I just quote this...

Thank's Z-head did let this thing hang and it work great.

Actualy in the instruction they were saying not to use P connector
put i could not figure this was it.

Hi guys

question for s30's guru in you

picture of my alternator in the car
and new MSA alternator

there is a yellow wire coming out of the MSA alternator with a sqare plastic connector...

Well here it did cost me 100$ for the job i think this is not much regarding the fact that
I add a price from a body guy and it was around 300$ color match blablabla...
I knew about these guys but...

Today i went to see Dboss a guy here not far from Montreal that does

body work withou paint
in french
debosselage sans peinture were the name come from

Dboss

So i took my hood to the guy...

oups should read will the piston get all the way back iin the cylinder

I understang changing you brakes for disk and 280zx calipers but i would not modify anything in there. I do not think these brakes are the type that fail
much with all the parts in. if it is for...

Yesterday i did refresh Brake and clutch fluids

but back some fuel in he tank

started engine (one of the fule hose feeding a carb was leaking) fixed it
cleaned the garage floor of the mess
...

Here are the after images

6269362694626956269662697

At start i wanted to change my diff for a VLSD that i found last summer

And Z31 Axle that i also found last summer remembered the u joint problem that i had
with my previous Z. And that i was...

Remove the to short link kit,

Machined two longer spacers (paint them)

clean the car as it was in the garage all winter and i did lot of parts sanding
and lots of dusty work under the car.
...

There is a guy in montreal looking for somethng to start with i saw that on Hybrid Z

in the forum where you present yourself

Bonjour from Montréal, Québec! - New Members Forum - HybridZ
...

Personaly i wouldnot pay much for th first one I had sold it 22 years ago and it was already a rust bucket

So i prefer the one i have now. It is in greater shape.

nothing is easy in that rear end resto.

now that i figured a way of using my 300zx half shaft without braking the bank

installed the link kit

i know that these early S30's are not straight...

For anyone who read this, I called the guy that sold me those CV halfshafts cause they are exac same lenght from
flange to flange so lenght from diff to companion flange are exact same. but yokes...

Hi Jon i know you are out of business with this to bad for me.

And i got chequered flag racing axle and companion flanges but my z31t are to long do you have the lenght

that they should be so i...

Thank you for these valuable infos
I will do some reading on hybrid Z

Note i also read on hybrid Z that the travel on standard 240Z half shaft is about 2" 3/8 witch is much longer travel then...

Actually I had 2 goals in my mod.

I was running a CLSD R200 that was noisy and had suffer from overheat. I needed to replce it
I was tired of changing U joints

So i found this nice VLSD on...

I am converting my rear end.

After a few problem's with a VLSD R200 that was not fitting my Z31 halt shaft.

Not same number of splines. Had my CLSD R200 rebuilt with the VLSD gears.

Started...

Here i a little post on a repair technique for cracked plastic panels. As long as you have all the pieces and you
see only one side of it.


Just take a piece of plastic I used plastic card that...

61505615066150761508Maybe a little late but if it can help here is my 240Z

with no wheel not strut

Well today did nothing, But lately i did remove all suspension, break, Driveshaft , muffler just to have room to work. then i fidured that i would look at my gas tank while you are there so removed...

««i did a quick look on the thing looks interesting i will certainly read all. Note that the question is more like who does and who dont consider the difference
and when not specified consider dry...

««i did a quick look on the thing looks interesting i will certainly read all. Note that the question is more like who does and who dont consider the difference
and when not specified consider dry...

Just to see who does and who dont?


If not do you decrease at all or not at all?