Search:

When I got my car it was sitting for 14 years and the AFM had clear silicone around the cover . I opened it and found that a butter fingers mechanic unwound the spring. I reset the spring and...

If the timing Chain tensioner broke you could have jumped time. To verify rings pull all plugs and put a little marvel mystery oil in and then compression test if it rises then it is rings. No change...

I do not have a garage but I will tell you what I have.
1. 1978 280Z
2.1972 Chevy C-10 long bed (I have owned this truck since 95)
3. 1967 Jeep J2000 Pickup (my sons project)
4. 1999 Chevy...

As a master auto technician. If you have a leak and need to get home to repair it I use Alumaseal powdered stop leak. In 40 + year old cooling systems you can create more problems then fix with bars...

Here is a link to what he made . I will get pic's of the hoses on the blazer today
Extended Rear Brake Line

I am working on a clients 69 K5 and needed braided brake hoses. I could not wait a week for them so I found out East Coast Gear supply could make D.O.T approved Brake hoses that day. The best part...

Well I think I have seen it all. Some of the issues I have dealt with were just plain dumbfounding.
1. Glued nipple on cold start valve.

2. Phone wire on fuel pump power.

3. Foam around trans...

Well built my own relay worked great. Drove car down to get something to eat after 30 min of sitting I went to leave and no start:mad:. I get the car home run every test in the FSM and bible. I am...

Actually figured it out I did not have a 6 pin connector but used blade terminals and one ring terminal

The windshield does leak because of a huge gap in the rubber. it is on the list .

Steve I will let you know if they say they do not have it.

What is needed to build one?

Well my car has sat for 14 years and it runs great I cleaned all of the electrical connectors then applied dielectric grease. the car started randomly cutting off well I have checked it is the...

The interior is in really good shape I just need to get carpet. I also need to figure out my turn signals and high beam head lamps and wipers

I plan on it for a while but might get a set of BBS later

you have a very clean 240Z

This is my build, I was originally working on it for a customer when his work van blew the engine. He traded me the car for installing the engine.
Here is what I have accomplished so far and how...

Well I am not a new person to any point of the vehicle hobby I have owned everything from old VW's to classic GM products. Through a trad I am now delving into Z cars I have always liked them but...