Search:

Alright guys, you've talked me into it - I'm joining the LSD Club!

74685

How many HP does a person loose from the crank to the wheels? All the Dyno results that I have seen recently are to the wheels..........

Naturally once you get that O2 sensor and gauge you will want to know where your oil temp is too.............does it ever end?!?

Welcome to the group - get ready for a great ride!

This may help with your quest

http://www.classiczcars.com/forums/open-s30-z-discussions/52059-whats-smell-exhaust-fumes.html

He may need your header (if you are going to use one) to get that exhaust ported and polished.
Are you going to go with a lightened flywheel and a larger exhaust - what kind of carb system?
If I...

Porting and polishing will help - it adds time to the build to get everything ground down but I'm sure that will help achieve your goals too.

I have my local PPG location mix - do you have the mix numbers? Can't promise it will work for you...................

Excellent! Thanks for sharing - I'll get one on order!

Mike - How did that kick plate attach?

Installed performance pedals
73982

Not a lot of conversation on this one but I just completed an install and really topped of my interior nicely. Great foot feel - the rest, brake, and clutch as a very aggressive topping - the gas...

If you are wanting 200+ HP - you need to change crank and stroke it. My cay dyno's close to 200 but with a N42/42 combo - I don't believe you will hit your HP goals above without changing the...

.......we played on the computer

73152

Ken-
Have you dyno'd?

Ken -
Tell us about your build so we can keep up with your tuning. Pics are always welcome!

15-16 is way lean at idle - and IMO 11.5 is too phat - your plugs will be black with soot.

Here you go - great improvement as well

http://www.classiczcars.com/forums/carburetors-s30/30584-accelerator-linkage-fix-questions.html

Just remember when buying your jets they come in two different head mm sizes. If you buy anywhere other than Todd - be sure to tell them you want the smaller mm size

Here is what I have collected...

I'm happy at 13'ish........I was in the 11's and 12's but my plugs were black. I'm happy on the phat side without black plugs! ;)

Ryan -
zKars gave you his setting and both you have the same set up........unknowing about cam. You may want to start with his baseline setting (one he posts his ARF - or a pic of his plugs) in...

Here is an example of my worksheet - I can not figure out how to post a spreadsheet to this site:
As you see I was still a little phat on this setting with my Main Fuel/Main Air

Date 7-Jun-14...

Pilot Jet => 0-2%% throttle - cruising - low end power - (higher number equals richer mix)
Main Jet => 25-100% throttle - Adds or removes fuel from the entire RPM range - (higher number equals...

Ryan-
I use a good ole' piece of paper in the passengers seat. It will take a lot of different settings to find the best one for your AFR. I would start by leaning out your pilot since you are...

What is your AFR at idle, 35 and 60, and WOT?