Results 1 to 5 of 5

Thread: c210 bits wanted / l24et engine for sale

  1. #1
    Registered User
    Member ID
    CZCC-11251
    Join Date
    Apr 2006
    Posts
    13

    Default c210 bits wanted / l24et engine for sale

    hay guys chasing some bits for a project ive got

    to suit 2 door c210, good condition parts

    tailshaft (auto and manual are the same yeah?)
    pair of doors rust free with original locks and latches in good nick.. good luck I know, alternatively a pair of locks and a passenger side latch assembly
    boot lid striker (bit on the lid the latch clicks on to)
    rear drivers side seat belt
    roof light console thing
    manual gear shifter boot
    headlight surrounds and grill
    good l24 engine with manifolds ect, box and flywheel

    if you have any of this **** laying around let me know. Im not in a huge rush to buy though.

    I have a L24 engine with a N47 head, oil return on the sump, water line fitting, and a banjo bolt oil line in the sump plug. its had a freshened up head and a new gasket but was blowing smoke apparently.. suit rebuild I spose. has a dizzy with new leads and some other bits hanging off it. no manifolds

  2. #2
    Registered User Mastadd240K's Avatar
    Member ID
    CZCC-11978
    Join Date
    Jun 2006
    Location
    Melb, Victoria AUS
    Posts
    482

    Default

    Door Locks are still available from nissan, and i believe they can even supply the ones that belong to your car with A new Key, They need your Vin or Key No.

    I think 180B sedan/Coupe Rear seat Belts are the Same.

    And head light Surrounds? the ones that clip the actual round Semi Sealed Fittings in? the Aluminum Ones? I have some 240k c110 ones, brand new..... They may suit but not shore


    Shannons 2014 Skyline Nationals :https://tinyurl.com/mcrtqux (ClassicZcars Thread)

  3. #3
    Registered User
    Member ID
    CZCC-11251
    Join Date
    Apr 2006
    Posts
    13

    Default

    interesting about the locks.. will look into it. but the holes for the locks on the doors are half fecked cause someone has tried and failed to fit aftermarket locks. but the passenger side latch is broken and the shells are rusty in the corners so its going to be easier to find a better pair of doors

    headlight surrounds are separate from the grill on c210.. look like this.


  4. #4
    Registered User Mastadd240K's Avatar
    Member ID
    CZCC-11978
    Join Date
    Jun 2006
    Location
    Melb, Victoria AUS
    Posts
    482

    Default

    Ahhhh i have a Set of those, in white tho, otherwise mint, they may be reproduction tho, under them there will be the Stainless steel Brackets i was talking about. ill take picture and show you


    Shannons 2014 Skyline Nationals :https://tinyurl.com/mcrtqux (ClassicZcars Thread)

  5. #5
    Registered User matt240K's Avatar
    Member ID
    CZCC-11461
    Join Date
    May 2006
    Location
    Tallebudgera (Gold Coast)
    Age
    51
    Posts
    53

    Default

    Your profile doesn't say where you are, but If you're in sydney try Carlos Casmiri at sportsclassic. I spoke with him this morning and he mentioned that he either had or was about to get a C210 Coupe.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. should i do this engine swap?
    By xkeithx in forum Engine and Drivetrain (S30)
    Replies: 3
    Last Post: 03-11-2003, 07:41 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •