Head light cover SCREW-ADJUSTING szie

[tamo3]

Hi,

I try to put back my head light to the fender and I realize I lost my screw for putting headlight to fender.

Datsun 240Z/260Z/280Z Head Lamp
Based on there, it called SCREW-ADJUSTING.
Part # 26022-01301.



Does anyone know the size of screw?

I don't want to pay $1 more for each screw.

Thanks,
tamo3

[redzedsled]

It is an M6 Crossed Recessed Pan Head Screw that is 37mm long with a very small cam washer underneath the head.

[mgood]

I had to replace a couple of mine when I reworked my head lights. I bought a box of 25 screws and the plastic receivers. I have a lot left, if you want some let me know (MP me and I can send them to you). If you look at the picture very close you can see the new ones.

[tamo3]

mgood,
Thanks for the offer. Your headlight bucket looks brand new!

redzedsled,
Thank you for the information.



I find out it is M5 and I was looking at wrong parts.
Actually, I was looking for part #10 instead of #5.
- SCREW-PAN HEAD M5 01431-00053

When I try to put it back together, I could not close the gap between fender and headlight bucket as you can see the photos. I was puzzled.... I search around the internet and figured out I put the headlight bucket from the front, not from the inside of the fender! no wonder the gap did not close.

Now the problem solved!

Thanks again!

tamo3

[Blue]

been there done that... sadly.